Support & Download Links
Last Revised: May 13/2020

ITEM DESCRIPTION DOWNLOAD IMAGE
       
Numedia FAQ & Knowledgebase
- For more detailed reference, help and support
     
 
 
Need further support? Call us directly at 1.800.676.4502
Mon.-Fri. 8-4pm EST
 
     
       
Device Drivers & Utilities     Click on image to enlarge
Digi Xstream/Xtend/Xbee XCTU, utility to program & pair Xstream or Xtend RF Modems.
Do not use without consulting us prior to doing so as this can render the modem & sign unusable if programmed wrong
Download
       
HL-340 (CH340) USB RS232 Adapter - driver installation:
Unzip/Extract the folder called "HL-340" then inside that extracted folder you can Run the "HL-340.exe" to start the driver installation. Once installed, plug the USB adapter in, and it should finish the install. You can now set the proper Com Port in our Numedia software, which you can verify in the Ports section of the Device Manager.
Download
       
Lantronix UDS1100 Device Installer, utility to program Universal Device Server.(Will Require .NETv4+)
Only required for searching your network for Lantronix products on your network if IP address is unknown.
Download
       
TITAN-USB RS232 Serial Adapter
OR
CHIP-X USB-RS232 Adapter
USB RS232 Adapter - driver installation:
Mini CD enclosed in sleeve of packaging or download from here. Run the "start.html" file, then click on the section near the middle that says "USB Industrial Serial Adapters", and brings you to a 2nd page where you will select the driver installation link for your proper O/S(Win10-8-7 etc..)Once installed, plug the USB adapter in, and it should finish the install. You can now set the proper Com Port in our Numedia software, which you can verify in the Ports section of the Device Manager.
Download
       
Utek RS485/422 USB adapter USB to RS485/422 (USB stick with direct wire/phoenix connector):
Mini CD enclosed in sleeve of packaging or download from here.  Open The USB2.0 folder where you will select the driver installation link for your proper O/S(Win10-8-7 etc..)and run the "CDM-xxx.EXE" & Once installed, plug the USB adapter in, and it should finish the install. You can now set the proper Com Port in our Numedia software, which you can verify in the Ports section of the Device Manager.
Download
       
USR TCP232-306 - Serial to Ethernet Device Server-TCP/IP-Serial Setup Instructions USR Serial to Ethernet Server Setup & Configuration Instructions. Download
USR-Serial to Ethernet Device Server- Setup examples & Instructions -Wireless RF Modem to Network & Wired connections & setup instructions. Download  
USR-VCOM TCP/IP-Serial Port Server/Redirector application USR Virtual com port redirector- not supported by us. Download  
       
VS-Com USB to serial-RS232(smaller one on left)/RS422/RS485(larger one on right) adapter/converter.
Download
       
NMLite / Sign32
- Automatic sign system software
for 1 color monochrome signs.
     
NM-Lite / Sign32 Software is customized and specific to each sign/site and if you require the entire version of your specific software, please contact us to arrange the proper software download be made for your sign. Serial number is required, which we can assist with and a $75 fee via Credit Card is required.
       
Numedia2000 / NMVer3 / NMVer4
- Custom messaging software
for 1 color monochrome signs.
     
Numedia2000/ NMVer3/NMVer4- Software is customized and specific to each sign/site and if you require the entire version of your specific software, please contact us to arrange the proper software download be made for your sign. Serial number is required, which we can assist with and a $75 fee via Credit Card is required.  
Numedia 2000 or NMVer3 Software Update Patch to NMVer4      (Not for NMLite/Sign32 Versions)
NOTE: these files are to be ADDED to your existing version of software.
ONLY for numedia signs that have standard software without any custom modifications. (MAKE SURE TO BACK UP YOUR EXISTING PRIOR TO USING)Custom made versions of the software are independent to each site and will require you to consult us prior to using or downloading. *Extra charges may apply. Download

Download the update patch for the software, which is just a .ZIP file that contains 4 files, that need to be extracted and copied into our Numedia root folder(C:/NMVer3), and overwrite the older files.

       
Numedia 2000/ NMVer3/4
Software reference guides & manuals
   
NM-Quick Start Guide   Download  
NM-Numedia-Using a schedule   Download  
NM- Hardware & Software Requirements   Download  
NM-TCP/IP Network Setup   Download  
NM-Dial-up Setup   Download  
NM-Numedia Editor window map   Download  
NM-Numedia Text file editor & toolbar descriptions   Download  
       
Numedia RGB/MVSR
- full colour video software
     
You must verify or be sure to the software version you require. Call 1-800-676-4502 for assistance.
LED Art-C1/C3 RGB Software
-Ver.1.2.2.1
LED Art Software-for use ONLY with C1/C3 controller Download
  LED Art Software User Manual Download  
HD Player-C4/C10 RGB Software
-Ver.5 (for C10) & Ver.7 (for C15)
HD Player Software-for use ONLY with C10-C15-C16 controller Download Ver.8

  HD Player Software User Manual Download  
Yaham-Led Editor-M20/M30 RGB Software-Ver.9 LED Editor Software-for use ONLY with M20 controller Download
  LED Editor Software User Manual Download  
Led Fonts Package - for precise pixel placement of text versus TrueType font inconsistencies.   Download  
       
Unilumin RGB 6mm/10mm uSurface Led Software / LCT / Manuals      
Pluto Manager Software & User Manual
-Ver.4.5.2
Unilumin/Novastar Pluto Manager Software & User Manual Download
LedVision Software & User Manual
-Ver.6.5
Unilumin/C4 colorlite-LedVision Software & User Manual Download